OVERVIEW: Finally, there's a heavy duty adjustable rear wheelie bar that will keep you on two wheels when pulling high powered wheelies! Long suspension arms and upper adjustable turnbuckles pair with oil-filled shocks with threaded preload adjustment and adjustable mounting angles to handle the bumps and jumps. There are also turnbuckles for toe adjustability on the dual bellcrank steering system. The front chassis brace doubles to protect the steering system from damage, while the rear chassis brace lets the i10T pop over higher obstacles. The stadium monster truck body is already precut and prefinished, and you'll also find a pair of LED flood lights mounted to the front bumper. This 'roller' version does not include electronics; it requires a 2-channel radio system, ESC, motor, battery, and servo of your choice. CHASSIS High-clearance molded tub design Adjustable molded battery stay Impact absorbing front bumper Bumper-mounted LED lights DRIVETRAIN Racing 3-gear transmission Rear gear differential Adjustable slipper clutch Molded gear cover Adjustable motor mount Rear steel dogbones and axles Full ball bearings in drivetrain Monster truck dish-type wheels Pre-mounted and pre-glued monster truck tires SUSPENSION Long-reach lower suspension arms Turnbuckle adjustable upper links Oil-filled dampers Threaded damper bodies Front metal suspension brace Adjustable camber Adjustable shock angle Adjustable upper link mounting points Adjustable rear wheelie bar STEERING Dual bellcrank design Built-in servo saver Adjustable front toe in/out MORE Pre-painted stadium monster truck body SPECIFICATIONS Length (not including wheelie bar): 420mm (16.5-inches) Width: 320mm (12.6-inches) Height: 236mm (9.3-inches) Wheelbase: 285mm (11.2-inches) Weight (RTR, no battery): 1905g (4 lbs. 3.2-oz. )To get up and running you will need: 2-channel radio system ESC and motor Steering servo 6-cell NiCd/NiMH or 2S-3S LiPo battery pack. Item# i10T-NE Barcode: 917890017743